CPT Level 1 4L60E

• CPT Front Pump.
• CPT h/d valve body calibration
• Late model GM hardened sunshell
• CPT 3/4 stack for increased holding power over stock
• CPT performance friction band with a stock width
• "Corvette" 093 servo for 2nd gear
• All new thrust washers and bearings
• New accumulator Pistons
• Precision Paper and rubber kit
• New bushings throughout
• Treated CPT Separator plate with hardened checkball seats
• All clearances brought to tight side of spec
• INCLUDES ROAD QUALIFICATION OF THE TRANSMISSION PRIOR TO SHIPPMENT
• This transmission is Rated to 300 Flywheel horsepower and will carry a 1 year unlimited mileage warranty when used with a proper new of refurbished converter.

• CPT Front Pump
• CPT Performance Shift Kit
• CPT modified Reverse Drum
• Hand Treated Sun Gear
• Beast Sun gear shell
• CPT 8 Clutch stack for 4th gear
• Molded Steel Apply pistons
• Wide performance band
• "Corvette" 093 servo for 2nd gear
• New accumulator Pistons
• Precision Paper and rubber kit
• All new thrust washers and bearings
• New bushings throughout
• Treated CPT Separator plate with hardened checkball seats
• All clearances brought to tight side of spec
• INCLUDES ROAD QUALIFICATION OF THE TRANSMISSION PRIOR TO SHIPPMENT
• This transmission is Rated to 450 Flywheel horsepower and will carry a 1 year unlimited mileage warranty with use of a proper new or refurbished converter.

• CPT Front Pump With Hardened Pump rings and Blocked Pump slide
• CPT modified Valvebody calibration for more fluid volume and firmer shifts
• CPT modified Reverse drum
• Hand Treated Sun Gear
• Beast Sun gear shell
• CPT 9 Clutch set for fourth gear holding power
• Molded Steel Apply pistons
• Wide performance band
• Corvette 093 servo for 2nd apply
• Fairbanks Billet 4th gear apply servo
• GM Late model sprag
• New accumulator Pistons
• Precision Paper and rubber kit
• New bushings throughout
• All new Thrust washers and bearing kit
• Treated CPT Separator plate with hardened checkball seats
• All clearances brought to tight side of spec
• INCLUDES ROAD QUALIFICATION OF THE TRANSMISSION PRIOR TO SHIPPMENT
• This transmission is Rated to 600 Flywheel horsepower and will carry a 1 year unlimited mileage warranty with use of a proper New or refurbished 10 inch converter.

• CPT Blueprinted 10 vane front pump with Hardened rings and Blocked pump slide.
• .500 Boost valve
• Trans Go HD2 Shift kit
• New GM Reverse Input drum
• Hand Treated Sun Gear
• 4L65E Output Shaft
• 4l65E Front Support
• Beast Sun gear shell
• Raybestos Blue Plate Special Clutches set to .015 clearance
• Molded Steel Forward and 3/4 pistons
• Alto RED EAGLE frictions and KOLENE treated steels in every other drum.
• Ultra Super wide Composite Band With heavy duty reinforced pin area to prevent breakage.
• Billet 2nd Gear Apply servo
• Fairbanks Billet 4th gear apply servo
• Borg Warner Dual Cage Forward Sprag
• Heavy Duty Low Roller
• New accumulator Pistons
• Precision Paper and rubber kit
• New bushings throughout
• Treated CPT Separator plate with hardened checkball seats
• All clearances brought to tight side of spec
• All new Thrust washer and bearing kit
• Deep pan and filter
• Includes Street Qualifying of transmission before shipment.
• This transmission is Rated to 800 Flywheel horsepower and will carry a 1 year unlimited mileage warranty with use of a proper New or refurbished 10 inch converter.

2400 stall 12 inch lockup torque converter with furnace brazed fins and quality lockup friction. Recommended for daily drivers and where track performance is less important than derivability.

* Stock stall speed also available with this converter design

We do Not charge a core charge up front but we do expect the core back on all transmissions We do supply a pre paid label for core return.